ESS Tuning

The ESS TS3 Upgrade kit brings your 330 into supercar territory with performance that rivals some of the fastest production cars in the world. With instant torque and an amazing top end this kit must simply be experienced.

System components:

-Forged, lowered compression ESS pistons, 9.0:1CR.
-Uni-belt SC drive system with TS3 spec SC pulley.
-6 larger Bosch fuel injectors, TS3 spec.
-Perfectly optimized, dyno tweaked 330 TS3 MS43 ECU software.
-Fuel pump and new fuel filter assembly
-Detailed, step-by-step installation manual.
-All required gaskets, bolts and installation hardware for engine assembly is included.

*The TS3 must be installed in addition to a ESS TS2 kit (115-12) and ESS M52TU/M54 SC Camshaft Kit (117-01) along with exhaust headers. We also strongly recommend porting the exhaust ports 8-10mm wider with the installation of this kit to achieve optimal performance.

A high performance clutch is required and LSD recommended.

A 15PSI pulley upgrade kit is available as an option for 93+ octane fuel.

This kit is currently only available for:

-Cars with the MS43 engine control system. MS45 TS3 is expected in second half of 2009.
-Cars with manual transmission

Part number: 115-17
Boost pressure: 14-15 PSI depending on fuel available
Horsepower at 14PSI: 443 SAE/450 DIN
Horsepower at 15PSI: 463 SAE/470 DIN
Torque at 14PSI: 383 lb-ft/520 Nm
Torque at 15PSI: 398 lb-ft/540 Nm
Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
0 - 60: Man : 4.2 sec